609-3051: Track Roller Group | Cat® Parts Store

Home

Undercarriage

Rolling Components

Track Roller Groups

609-3051: Track Roller Group

Cat® Track Roller Group SINGLE FLANGE, Standard Application, 152.4mm Tread Diameter, 170.68mm Mounting Width

Brand: Cat

Product Images

609-3051: Track Roller Group

Cat® Track Roller Group SINGLE FLANGE, Standard Application, 152.4mm Tread Diameter, 170.68mm Mounting Width

Brand: Cat

Will It Fit?

Add your equipment to see if this part fits or if there are repair options available.

Add Equipment

Will it fit or looking for a repair?Add your equipment to see if this part fits or if there are repair options available.

Check Price

Diagram

Description

Specifications

Compatible Models

Description for part number 609-3051

Description:
Single flange track rollers (609-3051) support the machine on the track and guide the machine along the track.

Attributes:
• Single Flange Track Roller for General Duty systems.
• Flange Diameter: 175 mm (6.88 in)
• Tread Diameter: 152 mm (6 in)
• Single flange rollers are used adjacent to the sprocket so they can be placed closer to the sprocket.
• Shafts and bearings are designed to reduce friction and wear and to provide maximum strength.
• General Duty Track was developed to provide you a cost effective option for later-in-life-cycle or lower use machines. It is offered at a low initial price and designed for run to destruction. All Cat Undercarriage is backed by Undercarriage Assurance and made by Caterpillar and is hardened and quality tested to ensure productivity and performance appropriate to jobsite needs.

Application:
Consult your owner's manual or contact your local Cat Dealer for more information.

Warning:This product can expose you to chemicals including Lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Specifications for part number 609-3051

Units of Measure

Metric

Tread Diameter (mm):

152.4

Tread Diameter (in):

6.0

Mounting Width (in):

6.72

Application:

Standard Application

Flange Diameter (mm):

175.0

Mounting Bolt Axial Spacing (mm):

229.9

UC System:

Carrier Roller Compatible:

Mounting Width (mm):

170.68

Mounting Cap Bolt Thread Size:

M18

Link Outside Spread (in):

6.059

Inside Spread (in):

2.087

Link Outside Spread (mm):

153.9

Flange Diameter (in):

6.88

Inside Spread (mm):

Flange Type:

SINGLE FLANGE

Mounting Bolt Traverse Spacing (in):

3.5

Mounting Cap Bolt Hole Diameter (mm):

Mounting Cap Bolt Hole Diameter (in):

0.709

Shaft Length (in):

10.811

Shaft Length (mm):

274.6

Outer Flange Diameter (mm):

174.63

Shaft OD (mm):

50.47

Shaft OD (in):

1.987

Mounting Bolt Traverse Spacing (mm):

88.9

Mounting Bolt Axial Spacing (in):

9.051

Outer Flange Diameter (in):

6.875

Compatible Models for part number 609-3051

We currently do not have compatibility information for this part.

Compare Alternate Parts

Tread Diameter (in)

Mounting Width (in)

Link Outside Spread (in)

Description

609-3051: Track Roller Group

6.0

6.72

6.059

Cat® Track Roller Group SINGLE FLANGE, Standard Application, 152.4mm Tread Diameter, 170.68mm Mounting Width

497-8958: Track Roller Group

6.72

4.988

2.248

Cat® Track Roller Group Standard Application, DOUBLE FLANGE, 152.4mm Tread Diameter, 170.68mm Mounting Width

596-6879: Double Flange Track Roller

6.748

6.74

4.941

Cat® Track Roller Group Standard Application, DOUBLE FLANGE, 152.4mm Tread Diameter, 171.4mm Mounting Width

596-6878: Single Flange Track Roller

6.748

3937.008

4.941

Cat® Track Roller Group Standard Application, SINGLE FLANGE, 152.4mm Tread Diameter, 171.4mm Mounting Width

Key

Factory Fit

This part is designed to fit your Cat equipment based on the manufacturer’s specifications.

Any changes to the manufacturer’s configuration might result in the product not fitting your Cat equipment. Please consult your Cat Dealer before purchasing to ensure that this part is appropriate for your Cat equipment in its current condition and assumed configuration. This indicator cannot guarantee compatibility for all parts.

Remanufactured

Non-Returnable

Kit

Replaced

Remanufactured

Non-Returnable

Kit

Replaced