263-3798: Track Shoe | Cat® Parts Store

Home

Undercarriage

Track Components

Track Shoes

263-3798: Track Shoe

Cat® Track Shoe Single Grouser, 635mm Wide, Master Joint, MS, Clipped

Brand: Cat

Product Images

263-3798: Track Shoe

Cat® Track Shoe Single Grouser, 635mm Wide, Master Joint, MS, Clipped

Brand: Cat

Will It Fit?

Add your equipment to see if this part fits or if there are repair options available.

Add Equipment

Will it fit or looking for a repair?Add your equipment to see if this part fits or if there are repair options available.

Check Price

Warranty Information

Return Policy

Diagram

Description

Specifications

Compatible Models

Parts diagram for 263-3798

Description for part number 263-3798

Description:
Track shoes provide flotation and traction for the machine and protection for the link assembly. Master track shoes are installed over the master track link.

Attributes:
• SystemOne™ Track is designed to operate at higher speeds and greater loads and components wear at a balanced rate. The result is maximum performance at the lowest possible operating cost.
• Moderate service track shoes are the best shoes for low to medium impact and abrasive conditions. Moderate service track shoes provide the best penetration and traction, resist wear and bending and are available in various widths and modifications. Moderate service track shoes are rolled from modified medium carbon steel.Attributes:Clipped track shoes have the grouser corners cut off to reduce turning resistance and bending force without loss of flotation and with little loss of overall wear life.

Warning:This product can expose you to chemicals including Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Specifications for part number 263-3798

Units of Measure

Metric

Shoe Width (mm):

635.0

Track Pitch (mm):

175.5

Bolt Size (in):

0.6299

Material:

Boron Steel

Track Pitch (in):

6.91

Plate Thickness (mm):

UC System:

ABRASION

Joint Type:

Master

ARM:

Shoe Bolt Hole Spacing B (mm):

94.5

Shoe Bolt Hole Spacing C (mm):

94.5

Shoe Width (in):

25.0

Shoe Bolt Hole Spacing A (mm):

52.86

Plate Thickness (in):

0.354

Shoe Section 1E Spec:

1E4111

Number of Grousers:

Single

Bolt Hole Diameter (in):

0.669

Clipped:

Yes

Master Bolt Thread:

M16

Shoe Type:

Bolt Hole Diameter (mm):

Bolt Size (mm):

M16

Compatible Models for part number 263-3798

TRACK-TYPE TRACTOR

D4C III D4K LGP D4K2 LGP D2 D3K LGP D4G D1 D3G D3K2 LGP D3C III

Compare Alternate Parts

Bolt Size (in)

Track Pitch (in)

Shoe Width (in)

Description

263-3798: Track Shoe

0.6299

6.91

25.0

Cat® Track Shoe Single Grouser, 635mm Wide, Master Joint, MS, Clipped

238-8371: Track Shoe

0.6299

6.9

25.0

Cat® Track Shoe 635mm Wide, Regular Joint, Self Cleaning

243-2693: Single Grouser Track Shoe

0.6299

6.9

18.11

Cat® Single Grouser Track Shoe maximizes grip in soft ground, supporting stability in off highway tracked equipment.

235-2559: Track Shoe

0.6299

6.9

15.945

Cat® Track Shoe Single Grouser, 405mm Wide, Regular Joint, MS

Key

Factory Fit

This part is designed to fit your Cat equipment based on the manufacturer’s specifications.

Any changes to the manufacturer’s configuration might result in the product not fitting your Cat equipment. Please consult your Cat Dealer before purchasing to ensure that this part is appropriate for your Cat equipment in its current condition and assumed configuration. This indicator cannot guarantee compatibility for all parts.

Remanufactured

Non-Returnable

Kit

Replaced

Remanufactured

Non-Returnable

Kit

Replaced