165-9289: 100mm Shaft Diameter Press in Double Lip Seal

Home

Hydraulics

Hydraulic Cylinders & Components

Other Cylinder Components

Cat® Press in Double Type Rubber Lip Seal for Cylinders

Brand: Cat

Product Images

165-9289: 100mm Shaft Diameter Press in Double Lip Seal

165-9289: 100mm Shaft Diameter Press in Double Lip Seal

Cat® Press in Double Type Rubber Lip Seal for Cylinders

Brand: Cat

Will it fit or looking for a repair?Add your equipment to see if this part fits or if there are repair options available.

Check Price

Frequently bought together

165-9289

096-2665

216-0005

View All Parts

Frequently bought together

165-9289: 100mm Shaft Diameter Press in Double Lip Seal

096-2665: 100mm Internal Diameter Backup Ring

216-0005: 98.4mm Inner Diameter U Cup Seal

170-9847: 99mm Inner Diameter Buffer Seal

114-0757: 105.148mm Outside Diameter Sleeve Bearing

095-1632: 5.7 x 129.6mm 90A NBR O-Ring

Diagram

Description

Specifications

Compatible Models

Description for part number 165-9289

Description:
Prevents external contaminants from entering the system. Single-lip (the lip is the projecting rim or edge of the seal) wipers clean the rod as it retracts. Double-lip wipers clean the rod as it retracts and seals oil, eliminating weeping (cosmetic leakage). The double-lip wipers are secured in place with a bearing amount. These urethane wipers are metal-encased for added strength. They are often referred to as canned wipers (metal-encased) or J wipers (the metal often forms a J shape when viewed in the cross-section).

Attributes:
• Seal material: Polyurethane (TPU)
• Groove axial width: 8 mm (0.31 in)
• Groove diameter: 114.02 mm (4.489 in)
• Shaft diameter: 100 mm (3.94 in)

Application:
Used as needed to service hydraulic cylinder components to keep your equipment leak free. Consult your owner's manual or contact your local Cat Dealer for more information.

Warning:This product can expose you to chemicals including Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Specifications for part number 165-9289

Units of Measure

Metric

Compatible Models for part number 165-9289

TRACK FELLER BUNCHER

TK1051 552 2 TK752 TK751 541 2 TK741 521B 2590 522B 541 1390 551 552

WHEELED EXCAVATOR

M325C MH M322D MH M322D2 MH3026 M322F M322D M322C M324D2 MH M325B

LOGGER

322C

EXCAVATOR

340F 322B L 345B II 324D FM LL 330D MH 329D LN 325B L 329D L 324D FM 324D 352 320D2 M325D MH 322B LN 324E L 320D L 345C L 323D SA 322C 323D S 336D LN 323D L 325C FM 323D LN 340F L UHD 324E LN 385B 345C 325D FM 325B LN 385C L 325D L 320B 320C 320D 365C L 330C L 326F L 320B S 320B N 320B L 365B II 322C FM 330C 326F 324D LN 330C MH 324D L 330D L 365C 325C 326F LN 325D 365B M320

MATERIAL HANDLER

MH3250 M325D MH MH3024

MOBILE HYD POWER UNIT

329D L 329E 324D LN 325D L 325D

WHEEL LOADER

980 XE 982XE 980K HLG 966 972K 972M 972 972L 972 XE 966 XE 966XE 980 982 980GC 972M XE 966M XE 980XE 980L 980K 972XE 980M 966L 966K 966M 982 XE 982M

Key

Factory Fit

This part is designed to fit your Cat equipment based on the manufacturer’s specifications.

Any changes to the manufacturer’s configuration might result in the product not fitting your Cat equipment. Please consult your Cat Dealer before purchasing to ensure that this part is appropriate for your Cat equipment in its current condition and assumed configuration. This indicator cannot guarantee compatibility for all parts.

Remanufactured

Non-Returnable

Kit

Replaced

Remanufactured

Non-Returnable

Kit

Replaced